Home >
E72-2G4M20S1C Wireless module CC2674P10 small size BLE high performance ARM core ZigBee low power consumption Thread

[Introduction]:E72-2G4M20S1C is a multi-protocol 2.4GHz patch-type wireless system-on-chip module independently developed based on the CC2674P10 produced by TI. The transmit power is 20dBm. It integrates an ARM microcontroller and a high-performance wireless transceiver. It adopts industrial-grade 48MHz high-precision low-temperature Drift crystal oscillator. CC2674P has great potential to become the wireless microcontroller of choice for future smart furniture, IoT transformation, and industrial automation. Since this module is a pure hardware SoC module, it needs to be programmed by the user before it can be used.

 Main parametersperformanceRemark
Minimum value Maximum value
Supply voltage (V)03.8Exceeding 3.8V will permanently burn the module
Blocking power (dBm)-10Less likely to be burned if used at close range
Working temperature (℃)-4085Industrial grade


 Main parametersperformanceRemark
Minimum value Typical valueMaximum value
Working voltage (V)1.93.33.8≥3.3V Guaranteed output power
Communication level (V)-3.3-Using 5V TTL risks burning out
Working temperature (℃)
-40-85Industrial grade design
Working frequency band (MHz)2400-2480-
Power consumptionEmission current (mA)-76.3-Instantaneous power consumption@20dBm
Receive current (mA)-9.51--
Sleep current (uA)-1.4--
Maximum transmit power (dBm)
1919.520-
Receiving sensitivity (dBm)--105-Bluetooth  125-kbps  (LE  Coded  PHY)


 Main parametersdescriptionRemark
reference distance620mIn a clear and open environment, the antenna gain is 2.0dBi, the antenna height is 2.0 meters, and the air rate is 1Mbps.
Crystal frequency48MHz/32.768kHigh speed 48MHz/low speed 32.768k
Support protocolBluetooth 5.3 Low Energy-
Zigbee
Thread
Packaging methodSMD -
Interface mode1.27mmstamp hole
IC full nameCC2674P106T0RGZ-
FLASH1024KB-
RAM256KB-
KernelArm ® Cortex ® -M33-
Dimensions28.7*17.5mm-
RF interfacePCB onboard antennaThe equivalent impedance is about 50Ω. The factory default is the onboard PCB antenna. If you need an IPEX antenna, please consult online customer service.