[Introduction]:E290-400MM20S is an ultra-small chip independently developed based on PANCHIP's new generation of domestic RF chip PAN3060, suitable for 433MHz, 470MHz ChirpIoTTM wireless modules. Using PAN3060 as the core, the new ChirpIoT TM modulation technology far exceeds the current FSK and GFSK modulation products. This module is targeted at smart homes, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment, and uses industrial-grade high-precision 32MHz crystal oscillators.
Pin number | Pin name | Pin direction | Pin usage |
1 | DCDC_IND | Internal DCDC output, connect external series inductor, refer to recommended circuit | |
2 | DCDC_FB | Internal DCDC feedback input, DCDC mode is connected to VDD123, refer to the recommended circuit | |
3 | VDD123 | power supply | Analog power supply, connect to VFB in DCDC mode, connect to main power supply in non-DCDC mode |
4 | VCC | power supply | Module power supply, voltage range 1.8V~3.6V |
5 | GND | Modular ground | |
6 | TXEN | output | Used for sending switching control, connected to internal GPIO0, can be left floating |
7 | RXEN | output | Used to receive switching control, connected to internal GPIO10, can be left floating |
8 | GND | Modular ground | |
9 | GND | Modular ground | |
10 | ON | Output/Input | RF antenna, theoretical output impedance 50Ω |
11 | GND | Modular ground | |
12 | GND | Modular ground | |
13 | CAD | output | CAD interrupt pin, connected to internal GPIO11 |
14 | TCXO | Connected to internal GPIO3 | |
15 | IRQ | output | RF interrupt pin, connected to internal GPIO1 |
16 | SMOKE | enter | SPI data input signal, IIC data pin |
17 | MISO | output | SPI data output signal |
18 | SCK | enter | SPI clock input pin, IIC clock input pin |
19 | NSS | enter | SPI chip select signal, always high in IIC mode |
20 | NRST | enter | reset pin |